This compact model is a submersible pump equipped with a DDHRS microbubble generating nozzle. It is very powerful for aeration and treatment of the water in a tank of 0.3 to 30 m3.
eco-Bubble®-400
This model is suitable for efficient aeration of various types of water, both freshwater and seawater.
＊ Micro-bubbles can be generated at a maximum rate of 20 L/min for seawater aeration, but only about 2 L/min for freshwater aeration. Therefore, for freshwater aeration, we recommend using pure oxygen gas or an oxygen concentrator to generate micro-bubbles instead of ambient air.
Releasing micro-bubbles from eco-Bubble®-400 (Video clip)
Most of the micro-bubbles are being suspended in the
water due to their extremely low buoyancy. The water
in the chamber is filled with micro-bubbles like mist.
eco-Bubble®-400 is releasing micro-bubbles in the high-
transparent sea water in the under water park in
Ushibuka, Kumamoto, Japan.
Model List
| Model | Output (W) | Phase/Voltage | Weight (kg) | Nozzle (Stainless steel) | Impeller |
|---|---|---|---|---|---|
| ECBL-400S | 400 | Single/100, 220 | 13.3 | 316 | Titanium |
| ECBL-400T | 400 | Triple/200, 380 | 13.3 | 316 | Titanium |
＊Size: 35 cm (H) x 25 cm (W)
− ECBL-400S/T with stainless steel for the nozzle and titanium for the impeller of the pump is required
for bubbling seawater.
− The design and specifications of the device are modified as the need arises.
− Purchase of only the nozzle is acceptable.
